Call Us: 508.747.0300
ISO 9001:2008 - AS9100:2009 REV C CERTIFICATION

EMI/RFI Shielding

You are here:

Honeycomb Vent Free Prototype Request Form

To help engineers cope with last minute design considerations, Tech-Etch will prepare for qualified programs "to spec" prototypes to both shorten lead times and smooth the engineering process before full production runs.

To enter a request for a Honeycomb Vent Free Prototype, simply fill in this form.

* All contact entries except "FAX" and "Preferred Method of Contact" are required.

Preferred Method of Contact
Specifications for Prototype Honeycomb Vent Requested

Choose vent specification requirements and fill in dimensions below. If you have a special requirement that does not fall within the parameters contained here, use the text box at the bottom of the page to explain these requirements and we will contact you to discuss options.

1. Choose Shielding Gasket:
BeCu 95T
Metalized Fabric
None

2. Choose Honeycomb Medium:
Straight
Cross-Cell

3. Choose Frame Style:

Style 1
Style 5
Frame Style 1
Frame Style 5
Style 7
Style 8
Frame Style 7
Frame Style 8

4. Fill in dimensions A, B, C, D, and SP (SP is space between holes) as indicated on the dimension diagram below:
Frame Dimension Diagram for A, B, C, D, and SP

Height (A): Width (B):
(For A and B the Minimum is 2" and the Maximum is 12")
(C): (D): (SP):
Note: Try to avoid placing holes at corners of the frame.
5. Choose Finish:
Iridite
Tin
Electroless Nickel
Note: Some charge may be applied for Electroless Nickel or Tin Finish.
6. RoHS Compliancy Required: Yes No
7. Estimated annual quantity needed:
Attachment/drawing:
Attachment/drawing:
Attachment/drawing:
Acceptable files include extensions: doc|xls|pdf|jpg|jpeg|png|gif|zip|rar|gz

© 2015. «Tech-Etch, Inc.». All rights reserved.
508.747.0300